Comparison Audi Q2 1.0 TFSI (116 Hp) & Citroen ID I 19 (62 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Audi | Citroen |
| Model: | Q2 | ID |
| Generation: | Q2 | ID I |
| Engine / modification: | 1.0 TFSI (116 Hp) | 19 (62 Hp) |
| Production start: | 2016 year | 1957 year |
| Production end: | 1960 year | |
| Coupe type: | SUV | Sedan |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.38 | |
| Fuel tank volume: | 65 l | |
| Emission standard: | EURO VI | |
| Power: | 116 hp | 62 hp |
| Max power in: | 5500 rpm. | 4000 rpm. |
| Maximum speed: | 190 km/h | 130 km/h |
| Acceleration from 0 to 100 km/h: | 10.7 sec | |
| Torque: | 200 Nm/2000-3500 rpm. | 125 Nm @ 2500 rpm. |
| Engine position: | Front, transverse | Front, longitudinal |
| Engine displacement: | 999 cm3 | 1911 cm3 |
| Engine oil capacity: | 4 l | |
| Coolant: | 9.5 l | |
| Fuel System: | Direct injection | Carburettor |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 3 | 4 |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 6.8 | |
| Piston Stroke: | 100 mm | |
| Cylinder Bore: | 78 mm | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 6 | 4 |
| Length: | 4191 mm | 4800 mm |
| Width: | 1794 mm | 1790 mm |
| Width including mirrors: | 2009 mm | |
| Height: | 1508 mm | 1470 mm |
| Wheelbase: | 2601 mm | 3125 mm |
| Front track: | 1547 mm | 1500 mm |
| Rear (Back) track: | 1541 mm | 1300 mm |
| Minimum volume of Luggage (trunk): | 405 l | 500 l |
| Maximum amount of Luggage (trunk): | 1050 l | |
| Front suspension: | Hydraulic elements | |
| Rear suspension: | Hydraulic elements | |
| Front brakes: | Ventilated discs | Disc |
| Rear brakes: | Disc | Drum |
| Kerb Weight: | 1150 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Power steering: | Electric Steering | Electric Steering |
| Minimum turning circle (turning diameter): | 11 m |