Comparison Fiat Bravo II 2.0 Multijet (165 Hp)
![]() Add car |
![]() Remove car |
Brand: | Fiat |
Model: | Bravo |
Generation: | Bravo II |
Engine / modification: | 2.0 Multijet (165 Hp) |
Production start: | 2008 year |
Production end: | 2012 year |
Coupe type: | Hatchback |
Num. of Doors: | 5 |
Num. of seats: | 5 |
Fuel consumption / economy - urban: | 6.9 l/100 km |
Fuel consumption / economy - extra urban: | 4.3 l/100 km |
Fuel consumption / economy - combined: | 5.3 l/100 km |
Fuel Type: | Diesel |
Fuel tank volume: | 57 l |
Emission standard: | Euro 5 |
CO2 emissions: | 139 g/km |
Power: | 165 hp |
Max power in: | 4000 rpm. |
Maximum speed: | 215 km/h |
Acceleration from 0 to 100 km/h: | 8.2 sec |
Torque: | 360 Nm @ 1750 rpm. |
Model Engine: | 198A8000 |
Engine position: | Front, transverse |
Engine displacement: | 1956 cm3 |
Engine oil capacity: | 4.9 l |
Coolant: | 7 l |
Fuel System: | Diesel Commonrail |
Position of cylinders: | Inline |
Valvetrain: | DOHC |
Number of cylinders: | 4 |
Number of valves per cylinder: | 4 |
Compression ratio: | 16.5 |
Piston Stroke: | 90.4 mm |
Cylinder Bore: | 83 mm |
Wheel Drive: | Front wheel drive |
Number of Gears (manual transmission): | 6 |
Length: | 4336 mm |
Width: | 1792 mm |
Height: | 1498 mm |
Wheelbase: | 2600 mm |
Front track: | 1538 mm |
Rear (Back) track: | 1532 mm |
Minimum volume of Luggage (trunk): | 400 l |
Maximum amount of Luggage (trunk): | 1175 l |
Front suspension: | Independent, Spring McPherson, with stabilizer |
Rear suspension: | Semi-dependent beam with stabilizer lateral stability |
Max weight: | 1870 kg |
Front brakes: | Ventilated discs |
Rear brakes: | Disc |
Kerb Weight: | 1360 kg |
ABS: | yes |
Steering type: | Steering rack and pinion |
Power steering: | Electric Steering |
Minimum turning circle (turning diameter): | 10.4 m |
Permitted trailer load with brakes (12%): | 1300 kg |
Permitted trailer load without brakes: | 500 kg |
Tire size: | 225/45 R17 |
Wheel rims size: | R17 |