Comparison Ford Fiesta VII 1.25 (60 Hp) 3d & Mazda Bongo Brawny 2.0 D (71 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Ford | Mazda |
| Model: | Fiesta | Bongo |
| Generation: | Fiesta VII | Bongo Brawny |
| Engine / modification: | 1.25 (60 Hp) 3d | 2.0 D (71 Hp) |
| Production start: | 2008 year | 1990 year |
| Production end: | 2013 year | 1994 year |
| Coupe type: | Hatchback | Minivan |
| Num. of Doors: | 3 | 4 |
| Num. of seats: | 5 | |
| Fuel consumption / economy - urban: | 7.3 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.3 l/100 km | |
| Fuel consumption / economy - combined: | 5.4 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 45 l | 62 l |
| Emission standard: | EURO IV | |
| Power: | 60 hp | 71 hp |
| Max power in: | 6000 rpm. | 4500 rpm. |
| Maximum speed: | 152 km/h | |
| Acceleration from 0 to 100 km/h: | 16.9 sec | |
| Torque: | 109 Nm/3600 rpm. | 128 Nm @ 3000 rpm. |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1242 cm3 | 1998 cm3 |
| Fuel System: | Multi-point injection | Diesel Commonrail |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | OHC | OHC |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 2 |
| Compression ratio: | 21.7 | |
| Piston Stroke: | 76.5 mm | 86 mm |
| Cylinder Bore: | 71.9 mm | 86 mm |
| Wheel Drive: | Front wheel drive | Rear wheel drive |
| Number of Gears (manual transmission): | 5 | |
| Length: | 3950 mm | 4385 mm |
| Width: | 1722 mm | 1690 mm |
| Height: | 1481 mm | 1970 mm |
| Wheelbase: | 2489 mm | 2400 mm |
| Front track: | 1493 mm | 1450 mm |
| Rear (Back) track: | 1480 mm | 1410 mm |
| Minimum volume of Luggage (trunk): | 295 l | |
| Maximum amount of Luggage (trunk): | 979 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Torsion | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Drum | Disc |
| Kerb Weight: | 1035 kg | 1360 kg |
| Power steering: | Electric Steering | |
| Minimum turning circle (turning diameter): | 10 m | |
| Tire size: | 175/65 R 14 |