Honda S800 0.8 (70 Hp) Technical specifications and fuel economy
Honda S800 0.8 (70 Hp) has a combined fuel consumption of 9 l/100 km | 26.1 mpg US | 31.4 mpg UK Honda S800 0.8 (70 Hp) accelerates from 0 to 100 km/h in 12.5 sec. The maximum speed is 160 km/h | 99 mph.
Honda S800 0.8 (70 Hp) Technical information
| Honda S800 0.8 (70 Hp) General information | |
|---|---|
| Brand : | Honda |
| Model : | S800 |
| Generation : | S800 |
| Engine / modification : | 0.8 (70 Hp) |
| Production start : | 1966 year |
| Production end : | 1970 year |
| Coupe type : | Coupe |
| Powertrain Architecture : | Internal Combustion engine |
| Num. of Doors : | 3 |
| Num. of seats : | 2 |
| Honda S800 0.8 (70 Hp) Fuel economy (consumption) | |
| Fuel consumption / economy - urban : | |
| Fuel consumption / economy - extra urban : | |
| Fuel consumption / economy - combined : | 9 l/100 km | 26.1 mpg US | 31.4 mpg UK |
| Fuel Type : | Petrol (Gasoline) |
| Fuel tank volume : | 30 l | 7.9 US gallons | 6.6 UK gallons |
| Honda S800 0.8 (70 Hp) Performance | |
| Power : | 70 hp | 51 kW |
| Max power in : | 8500 rpm. |
| Maximum speed : | 160 km/h | 99 mph |
| Acceleration from 0 to 100 km/h : | 12.5 sec |
| Torque : | 66 Nm @ 6000 rpm. |
| Honda S800 0.8 (70 Hp) Engine | |
| Engine position : | |
| Engine displacement : | 791 cm3 |
| Engine oil capacity : | 3.7 l |
| Fuel System : | |
| Aspiration / Turbine : | Naturally aspirated engine |
| Number of cylinders : | 4 |
| Compression ratio : | 9.2 |
| Piston Stroke : | 70 mm |
| Cylinder Bore : | 60 mm |
| Honda S800 0.8 (70 Hp) Transmission | |
| Wheel Drive : | Rear wheel drive |
| Honda S800 0.8 (70 Hp) Chassis | |
| Length : | 3335 mm | 131.3 in |
| Width : | 1400 mm | 55.1 in |
| Height : | 1215 mm | 47.8 in |
| Wheelbase : | 2000 mm | 78.7 in |
| Ride height(clearance) : | 160 mm | 6.3 in |
| Front suspension : | Independent torsion bar, double wishbone |
| Max weight : | |
| Front brakes : | Disc |
| Rear brakes : | Drum |
| Kerb Weight : | 755 kg | 1664 lbs |
| Steering type : | Steering rack and pinion |
| Minimum turning circle (turning diameter) : | 8.8 m |